Innovative ESC for 1/8 Onroad and Offroad cars.
TOP racing solution especially for 1/8 RC cars with powerful motors up to 2800 kV.
NITRIDE 1/8 is innovative electronic speed controller for sensored Brushless DC motors, designed especially for demanding conditions in 1/8 onroad cars, but perfect also for 1/8 offroad cars.
Using Advanced Cooling Technology based on Aluminium Nitride Ceramic cooler, NITRIDE 1/8 has excellent thermal conductivity and can be used with powerful motors up to 2800 kV.
NITRIDE 1/8 provides TFT LCD color display allowing very quick and easy adjustment of all parameters, post-race data evaluation and self-diagnostics without need of any other interface.
NITRIDE 1/8 brings new, innovative features that take 1/8 scale RC racing to a new, higher level.
Proven and NEW functions
In addition to the proven ones, NITRIDE 1/8 is endowed by great new and revolutionary functions:
- Revolutionary battery current and discharge real-time monitoring
- Innovative Intelligent Algorithms to protect ESC in case of motor failure or mechanical issue
- Post-race data saved after turn off
- Connector for intelligent fan (if needed) and fan holder
- Revolutionary motor analyzer function inside of ESC
- Revolutionary brake softening function for high speed and low grip braking - do not loose the traction in the end of the straight!
- FW update function
LCD Display
As you got used to by ELCERAM speedos, NITRIDE 1/8 is endowed with necessary LCD color display. Thanks to this you can set all the parameters and check all data directly at your ESC, without need of any programming card or a mobile application. All you need is inside your ESC.
The use is really easy - by 3 buttons you can quickly set anything you need and one view is enough to check all parameters necessary for race. Simply. Quickly. Precisely.
Dimensions
Although it brings so many great innovative functions, NITRIDE 1/8 is really compact sized.
Its dimensions are suitable for most of types of 1/8 onroad and offroad RC cars.
In addition to that, 70% of weight is located at the bottom of ESC for even better stability of your car!
Advanced Cooling Technology based on ceramic and Thick Film Technology
Advanced cooling technology based on Aluminium Nitride Ceramic Cooler, developed especially for NITRIDE, provides the ESC the excellent thermal conductivity and long-term resistance to high temperatures and loads.
Alminium Nitride Ceramic brings even 15 % better efficiency compared to Aluminium Oxide.
Power MOSFET´s transistors are attached on very thick silver layer with low resistance and high current capability. The silver layer is fired directly on Aluminium Nitride Cooler using temperature above 850 °C for excellent long-term reliability and thermal shock stability. The power stage - the heaviest component - is all way down.
During production, we use very thick layers of special materials such as silver and copper for very low internal resistance and the latest technologies inspired by advanced power systems designed and manufactured here in ELCERAM.
Quick and easy installation
Installation of NITRIDE 1/8 is quick and easy - you can stick it directly to the chassis of your car using a double-sided tape included in the package. Recommended tape type is 3M GPH-110.
If better cooling effect desired, you can stick NITRIDE 1/8 on any thermal conductive plate (for example aluminium) in the car.
NITRIDE 1/8 can be also installed using two screws M2.5.
The screws M2.5 must always be fully screwed in and tightened enough to ensure heat transfer between ceramic cooler and aluminium ESC housing, even if using the double-sided tape.
Fan Connector
For highly demanding conditions, where better cooling effect is desired, we recommend to use an external fan.
Basic ELCERAM fan 2510 is included in the package and also available as option part ELC025.
NITRIDE 1/8 is already equipped with connector for intelligent fan and pre-drilled mounting holes for quick and easy fan installation.
For motors more than 2300 kV we recommend to use stronger fan, for example 30 or 40 mm average.
Always use 2x external capacitors for motors above 2300 kV. Two pairs of external capacitors are included in the package.
Features:
- ESC for sensored BLDC motors max. 2800 kV.
- Developed especially for 1/8th offroad RC cars.
- Reverse polarity protection.
- Intelligent algorithms for ESC protection.
- Fine throttle and brake adjustment for excellent feeling.
- TFT LCD color display with resolution 160 x 80 pixels, matte finish.
- Size: 50 (L) x 43 (W) x 28 (H) mm.
- Weight: 112 g without wires.
- Wires AWG10 - 200 mm.
- Power supply: 2S - 4S LiPo.
- ESC current cont. / pulsed: 220 A / 1500 A.
- BEC: 6 - 8,4 V adjustable, current cont. / pulsed: 6 A / 15 A.
- Extreme low internal resistance based on silver conductive layer.
- Advanced Cooling Technology based on Aluminium Nitride Ceramic Cooler.
- Enhanced water and dust resistance.
- Changeable cover.
- Connector for Intelligent fan and fan holder.
- ELCERAM fan included in the package.
Functions:
- Revolutionary easy Rx calibration.
- Realtime monitoring: battery voltage, ESC and motor temperatures, motor diagnostics and more
- Revolutionary battery current and discharge monitoring.
- Revolutionary brake softening function.
- Revolutionary motor analyzer function.
- Pre-race diagnostics: motor temperature, sensor cable, bad motor, battery, BEC voltage and more.
- Post-race data evaluation.
- Easy programming: throttle, brake, boost and turbo timing, hall angle, BEC and many other functions.
- Continuous BEC voltage monitoring.
- Continuous motor speed monitoring.
- RPM limiter supported.
- Race data logging, temperature and other curves, histograms and more.
- Adjustable maintenance reminder for easy check.
- No programming interface needed.